TRONS ® Instructions for Use
You can download the Instructions For Use In PDF Format Here
TRONS ® Iron-On Name Transfers Instructions For Use
|STEP 1||STEP 2|
|Use a hard flat surface not an ironing board.
Turn the clothes inside out.
Set the iron to the maximum heat setting.
|Cut or tear the silicon sheet.
Each piece to be bigger than the labels.
Each piece to be used only once.
|STEP 3||STEP 4|
|Put the garment on the edge of the surface.
Put a label face up on the very edge.
|Put a piece of silicon paper on top of the label.
The silicon must be shiny side down.
The silicon should only be used once.
|STEP 5||STEP 6|
|Iron the silicon paper with the tip of the iron.
Press down and move the iron from side to side.
Iron for 25 seconds, do not use steam.
|Remove the silicon paper while still hot.
Allow to cool and check the label is bonded.
If the label is not bonded then repeat step 5.